Workshop on the production of charcoal

A workshop on the production of charcoal has four piroliz stoves in its composition.

Volume of stoves №1 and №3 makes up 25 cubic meters, volume of stoves №2 and №4 makes up 20 cubic meters.    

Waste of hard breeds of wood is used as raw material. Using of waste of fruit trees is also possible.

Stoves are equipped with the sensors of control of temperature condition.  The horizontal downloading of raw material is used and it is possible to overhead finishing loading these stoves subsequently.  

The applied options enable the use of wood with the sizes of wide spectrum.

In the technological process of production of charcoal no additional energy sources are used except for energy, got as a result of combustion of wood.    Warming and exposure of raw material at the process of piroliz takes a place at a temperature 500-600 degrees Celsius.   

A charcoal, got in the process of production, conforms to the State certification standard 7657-84 brand A.      
A minimum temperature of spontaneous combustion is 340 degrees Celsius. Lower concentration limit of self-ignition of the charcoal dust is 128 g/cubic meters.

At sending to the user a charcoal is stabilized for prevention of self-ignition.
At first 2008 four stoves of new generation are put into an operation, volume of each makes 25 cubes. The got charcoal in these stoves is made according to TT U 24.1-32692239-001: 2006.  

A producible charcoal on new technology has the more best physical and chemical indexes.

Duration of burning of this charcoal was increased on 30 percents.